ER chuck

Detailed description: non-calibration

Production of special, special, large, long, thin and extremely complex combined forming tools according to the requirements of arbitrary size according to the drawings

Detailed description of some materials:

SUF10/KF10/KF40/KF50/NK10Z/NR11/NK101/KF202/

NK201/KT10B/GK12B/CK20B/MK25/TC50

ASP60C/SKH59A/SKH55A/SKH55B/HSS

SKH11A/SKH44C/SKH42C

KF10: Harder than particulate diamond tungsten steel, with higher hardness and flexural strength, with better wear resistance, but slightly worse impact resistance. It is suitable for non-ferrous metals and non-ferrous metals with higher hardness such as quenching and tempering (HRC 48~67 degrees). It is suitable for medium and low speed light cutting of metals. Generally used in good working conditions, stable cutting, continuous light processing.

NR11/NK10Z: Very fine diamond tungsten steel, has better wear resistance and impact resistance. It is suitable for HRC25 ~48. It has good performance and versatility in high speed light cutting. The coating has good effect and can improve the wear resistance of cutting tools. It is often used in CNC numerical control equipment to process various kinds of high nickel alloys, heat-resistant alloys, titanium alloys, gray cast iron, hardened steel, stainless steel and other difficult-to-process materials (including nickel, chromium, Mo, silicon, titanium, etc.) before and after heat treatment and quenching. High temperature processing and comprehensive performance are good, allowing high cutting speed and lower feed requirement. Because of the poor toughness, it is not suitable for intermittent cutting or under the condition of insufficient rigidity of the process system, slight vibration and jump, otherwise it is easy to break or collapse.

KF202/NK201: Extremely fine diamond tungsten steel, versatile, can be used for HRC < 28 degrees of all kinds of materials common die steel, gray cast iron, heat-resistant alloy, aluminum alloy, copper, chilled cast iron, alloy steel, medium and low speed rough cutting to finish cutting, with better impact resistance and general wear resistance, wide application. Generally used for thick cutting and intermittent cutting. After coating, the effect is better and the service life of the tool can be increased.

ASP60C: (Harder and Wear-resistant): Imported harder and wear-resistant high-grade cobalt powder steel, hardening treatment: HRC70 [+2], with good wear resistance and impact resistance, often used in ordinary equipment processing various kinds of superalloys, heat-resistant alloys, gray cast iron, titanium alloy, stainless steel and other difficult-to-process materials (containing nickel, chromium, Mo, silicon). Excellent tools before heat treatment. High-temperature processing and comprehensive performance, high-speed cutting has a good effect. Because of the slightly poor toughness, it is not suitable for intermittent cutting or under the condition of insufficient rigidity of the process system, otherwise it is easy to break or collapse.

SKH59A: (super hard and wear-resistant) imported super hard and wear-resistant high-grade cobalt powder steel, hardening treatment: HRC66 [+2], with good wear resistance and impact resistance, good workmanship, generally used for high-speed light cutting, cutting all kinds of difficult-to-machine materials. After coating, the effect is better and the service life of the tool can be increased.

SKH44C: (imported high-hardness stainless steel): HRC60 + 2 degrees, with good rust, corrosion resistance, wear resistance and impact resistance, wide range of applications. The produced bit has a sharp edge, good cutting performance and wear resistance. It has good anti-rust performance and stable quality. It can produce various kinds of non-standard and special-shaped cutting tools.

Xiamen Yushang Hardware Tools Co., Ltd. is located in the beautiful coastal city---Xiamen. It is a wholly-owned enterprise, mainly engaged in the production and processing of CNC CNC tools, molds, forming fixtures, precision parts and wear-resistant accessories. In the field of tools and molds, we have accumulated years of research and development and production experience.

The company has a strong comprehensive production system, with high-tech production capacity, the introduction of CNC CNC machining center and its testing equipment, strong technical force, testing equipment, exquisite workmanship. Imported materials, precision grinding, sharp edge, high finish, special, non-standard, special-shaped, any size, shape, extremely complex medium and high products. It can be used for high quality, high efficiency and low cost applications. Guangfan is used in IT communications, aerospace, medical equipment, marine, automotive, printing, furniture, watches, mold manufacturing and other fields.

     Yushang Hardware adheres to the business philosophy of "customer first, quality first" and insists on providing customers with good service based on the principle of "customer first".