CNC tool is a tool for cutting in mechanical manufacturing, also known as cutting tool. CNC tools require high precision, so in daily use, we should pay attention to the maintenance and maintenance of CNC tools, in order to extend its service life. Next, the daily maintenance methods of NC tools are introduced.

The Method of Preventing NC Tool Rust

The most important thing for tool maintenance is to prevent rust and collision, so the tool lathe must be purchased.

About the anti-rust part;

1. Flat and excellent rust-proof oil;

2. Before rust prevention, we should pay attention to wipe the cutter clean; then rust prevention; keep indoor dry; collision part; cutter management lathe says that the cutter should be placed separately, and it is strictly forbidden to put the cutter together without any packaging.

The above is the NC tool handle part.

About cemented carbide blades; they are all delivered in boxes, just put the same blades together and don't need to be rust-proof or anything;

Be careful not to mix two or several blades together.

If it is a drill or milling cutter, especially a milling cutter, pay special attention to the protection of the edge, never touch or fall on the ground;

If there are more and more knitting heads, it is also necessary to pay attention to rust prevention, and then adjust the time to pay attention to whether the locking screw is loosened;

When the tool is used, if there is a screw anti-sticking agent, it must be added, so as to prevent the screw from sticking.

Assuming that the tool is rusty, it is not recommended to use sandpaper or other rough grinding, it is suggested to buy a polishing agent specially used for polishing. The particles are fine and very similar to toothpaste, so that the damage to the taper part of the tool is less and the throw out is smoother.

Daily Maintenance of NC Tools

An empirical rule of thumb is that the inspection of the tool handle and spindle should be used daily when the CNC machine tool works. This inspection shall include the removal of the tool shank and the overall cleaning of the parts. The use of coolant in the operation of the machine can leave residual parts of the tool handle, which can lead to serious adverse effects. An example of a negative effect is that a small chip is left in the coolant. The chip can reduce the scratched or scratched parts of the tool's performance. This, in turn, will cost more for stores, which will need to replace parts with a handle faster than they can, possibly destroying their job to work. A worse possibility is a machine and human injury accident. For these reasons, it is necessary, after the operation of the machine, the tool holder is removed, cleaned and checked to ensure that there is no pollution.

The spindle should also be inspected to ensure that it is working to maximize its potential. Periodic force checking design should adopt the year of trial-pull power spindle machine tool. Records of a result should be kept periodically and should never be overlooked when gaps arise. In a pull-down engine, if allowed to develop, it may lead to operator damage accident, which is a warning sign of the problem.

Spending time checking and cleaning the parts of the handle and spindle can reduce the potential cost of a store for machine life. It can create a safe working environment and reduce the probability of accidents.

The Island Tool hopes to help you. Http://www.ysgjtool.cn/pr.jsp?_pp=0_794_24